Re: [htdig] getfpucw


Subject: Re: [htdig] getfpucw
From: Torsten Neuer (tneuer@inwise.de)
Date: Thu Sep 14 2000 - 01:48:23 PDT


Adam Rabinowitz wrote:
>
> I'm not sure how to link manually. Is there a tutorial on the website?

No. This is sometimes system dependant.

- Have a look at the man page for ld(1) to see how to link
  a program against static libraries (dynamic ones are used
  by default unless specified otherwise).
- Add the required options to the linker flags in the Makefile
  for any program to be linked.
- run make

This may work, because static libraries do not need to be binary
compatible as their dynamic counterparts. They also do not have
version numbers that get checked at run-time. However, this will
produce much larger binaries.

There is still a good chance that static linking will fail, too,
but I'd give it a try if you do not want to rebuild libraries on
your system.

hth,

  Torsten

-- 
InWise - Wirtschaftlich-Wissenschaftlicher Internet Service GmbH
Waldhofstraße 14                            Tel: +49-4101-403605
D-25474 Ellerbek                            Fax: +49-4101-403606
E-Mail: info@inwise.de            Internet: http://www.inwise.de

------------------------------------ To unsubscribe from the htdig mailing list, send a message to htdig-unsubscribe@htdig.org You will receive a message to confirm this. List archives: <http://www.htdig.org/mail/menu.html> FAQ: <http://www.htdig.org/FAQ.html>



This archive was generated by hypermail 2b28 : Thu Sep 14 2000 - 01:51:07 PDT