Subject: RE: [htdig] Undefined Reference Compile Problems - Please Help
From: Massingham, David (email@example.com)
Date: Thu Jun 01 2000 - 03:46:08 PDT
>According to Massingham, David:
>> Yes, It was from a SRC RPM as I like running as packages. I was playing
>> morning and it turned out the Makefile.config library section was missing
>Strange. If this RPM uses the spec file I put together, it should run
>./configure as part of the build step, so if the -lz is missing there
>must be something causing the configure script to fail on your system,
>or your libraries are not in a standard location. Can you post the
>output of the "rpm --rebuild" or "rpm -ba" (or -bb, -bc, or -bi)?
>In which directory is your libz installed?
I don't think there's any cause for concern. I had two versions of libz
installed in different places, one being particularly old. Replacing that
with later files seems to have done the trick. (Damn my knackered old
> -----Original Message-----
> From: Geoff Hutchison [mailto:firstname.lastname@example.org]
> Sent: 31 May 2000 14:47
> To: Massingham, David
> Cc: 'email@example.com'
> Subject: Re: [htdig] Undefined Reference Compile Problems - Please Help
> At 8:03 PM +0100 5/30/00, Massingham, David wrote:
> >I seem to be suffering from some compile problems. I have the very latest
> >version of GCC, Make etc. so I don't think the problem can lie there. I
> >also tried some of the other solutions suggested for similar problems in
> >archive but I just can't get this program to compile.
> The errors are coming up because you do not have libz installed.
> I'll bet you're compiling a source package of some sort (e.g. RPM).
> You certainly didn't run the ./configure script yourself, which
> detects libz and disables the compression code if it doesn't find it.
> So either compile the actual .tar.gz source from
> <http://www.htdig.org/where.html> or install libz.
> -Geoff Hutchison
> Williams Students Online
> To unsubscribe from the htdig mailing list, send a message to
> You will receive a message to confirm this.
-- Gilles R. Detillieux E-mail: <firstname.lastname@example.org> Spinal Cord Research Centre WWW: http://www.scrc.umanitoba.ca/~grdetil Dept. Physiology, U. of Manitoba Phone: (204)789-3766 Winnipeg, MB R3E 3J7 (Canada) Fax: (204)789-3930
------------------------------------ To unsubscribe from the htdig mailing list, send a message to email@example.com You will receive a message to confirm this.
This archive was generated by hypermail 2b28 : Thu Jun 01 2000 - 01:34:45 PDT