[htdig] problem with maximum number of hops


Mark M. Ito (marki@jlab.org)
Tue, 5 Oct 1999 19:10:26 -0400 (EDT)


When I invoke the htdig command:

  htdig -i -v -h 3 -c <conf_dir>/shift_doc_toc.conf

I see the thing go much deeper than 3 hops away from the starting page. If
I try to vary the maxhops number, there does not seem to be any effect,
even with "-h 0".

The conf file that I am using is attached.

Any hints?

--
Mark M. Ito, Thomas Jefferson National Accelerator Facility
12000 Jefferson Ave., Mail Stop 12H, Newport News, VA 23606
Email: marki@jlab.org, Office: (757)269-5295, Pager: (757)849-7175
WWW: http://claspc2.cebaf.gov/~marki

# # Example config file for ht://Dig. # # This configuration file is used by all the programs that make up ht://Dig. # Please refer to the attribute reference manual for more details on what # can be put into this file. (http://www.htdig.org/confindex.html) # Note that most attributes have very reasonable default values so you # really only have to add attributes here if you want to change the defaults. # # What follows are some of the common attributes you might want to change. # # # Specify where the database files need to go. Make sure that there is # plenty of free disk space available for the databases. They can get # pretty big. # database_dir: /usr/local/src/htdig/build/db/hallb # # This specifies the URL where the robot (htdig) will start. You can specify # multiple URLs here. Just separate them by some whitespace. # The example here will cause the ht://Dig homepage and related pages to be # indexed. # You could also index all the URLs in a file like so: # start_url: `${common_dir}/start.url` # start_url: http://www.jlab.org/Hall-B # # This attribute limits the scope of the indexing process. The default is to # set it to the same as the start_url above. This way only pages that are on # the sites specified in the start_url attribute will be indexed and it will # reject any URLs that go outside of those sites. # # Keep in mind that the value for this attribute is just a list of string # patterns. As long as URLs contain at least one of the patterns it will be # seen as part of the scope of the index. # limit_urls_to: # # If there are particular pages that you definately do NOT want to index, you # can use the exclude_urls attribute. The value is a list of string patterns. # If a URL matches any of the patterns, it will NOT be indexed. This is # useful to exclude things like virtual web trees or database accesses. By # default, all CGI URLs will be excluded. (Note that the /cgi-bin/ convention # may not work on your web server. Check the path prefix used on your web # server.) # exclude_urls: /cgi-bin/ .cgi nikos latex2html uscongress herao rhic.bnl viper.princeton.edu bnlk0 www.newport-news.va.us yannick_thesis dit1.state.va.us /e787/ clas/collaborators_home.html www.esf.c-strasbourg.fr # # The string htdig will send in every request to identify the robot. Change # this to your email address. # maintainer: marki@jlab.org # # The excerpts that are displayed in long results rely on stored information # in the index databases. The compiled default only stores 512 characters of # text from each document (this excludes any HTML markup...) If you plan on # using the excerpts you probably want to make this larger. The only concern # here is that more disk space is going to be needed to store the additional # information. Since disk space is cheap (! :-)) you might want to set this # to a value so that a large percentage of the documents that you are going # to be indexing are stored completely in the database. At SDSU we found # that by setting this value to about 50k the index would get 97% of all # documents completely and only 3% was cut off at 50k. You probably want to # experiment with this value. # Note that if you want to set this value low, you probably want to set the # excerpt_show_top attribute to false so that the top excerpt_length characters # of the document are always shown. # max_head_length: 10000 # # To limit network connections, ht://Dig will only pull up to a certain limit # of bytes. This prevents the indexing from dying because the server keeps # sending information. However, several FAQs happen because people have files # bigger than the default limit of 100KB. This sets the default a bit higher. # (see <http://www.htdig.org/FAQ.html> for more) # max_doc_size: 200000 # # max number of hops # max_hop_count: 1 # # Depending on your needs, you might want to enable some of the fuzzy search # algorithms. There are several to choose from and you can use them in any # combination you feel comfortable with. Each algorithm will get a weight # assigned to it so that in combinations of algorithms, certain algorithms get # preference over others. Note that the weights only affect the ranking of # the results, not the actual searching. # The available algorithms are: # exact # endings # synonyms # soundex # metaphone # By default only the "exact" algorithm is used with weight 1. # Note that if you are going to use any of the algorithms other than "exact", # you need to use the htfuzzy program to generate the databases that each # algorithm requires. # search_algorithm: exact:1 synonyms:0.5 endings:0.1 # # The following are the templates used in the builtin search results # The default is to use compiled versions of these files, which produces # slightly faster results. However, uncommenting these lines makes it # very easy to change the format of search results. # See <http://www.htdig.org/hts_templates.html for more details. # # template_map: Long long ${common_dir}/long.html \ # Short short ${common_dir}/short.html # template_name: long # # The following are used to change the text for the page index. # The defaults are just boring text numbers. These images spice # up the result pages quite a bit. (Feel free to do whatever, though) # next_page_text: <img src=http://claspc2.cebaf.gov/icons/htdig/buttonr.gif border=0 align=middle width=30 height=30 alt=next> no_next_page_text: prev_page_text: <img src=http://claspc2.cebaf.gov/icons/htdig/buttonl.gif border=0 align=middle width=30 height=30 alt=prev> no_prev_page_text: page_number_text: "<img src=http://claspc2.cebaf.gov/icons/htdig/button1.gif border=0 align=middle width=30 height=30 alt=1>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button2.gif border=0 align=middle width=30 height=30 alt=2>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button3.gif border=0 align=middle width=30 height=30 alt=3>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button4.gif border=0 align=middle width=30 height=30 alt=4>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button5.gif border=0 align=middle width=30 height=30 alt=5>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button6.gif border=0 align=middle width=30 height=30 alt=6>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button7.gif border=0 align=middle width=30 height=30 alt=7>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button8.gif border=0 align=middle width=30 height=30 alt=8>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button9.gif border=0 align=middle width=30 height=30 alt=9>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button10.gif border=0 align=middle width=30 height=30 alt=10>" # # To make the current page stand out, we will put a border arround the # image for that page. # no_page_number_text: "<img src=http://claspc2.cebaf.gov/icons/htdig/button1.gif border=2 align=middle width=30 height=30 alt=1>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button2.gif border=2 align=middle width=30 height=30 alt=2>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button3.gif border=2 align=middle width=30 height=30 alt=3>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button4.gif border=2 align=middle width=30 height=30 alt=4>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button5.gif border=2 align=middle width=30 height=30 alt=5>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button6.gif border=2 align=middle width=30 height=30 alt=6>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button7.gif border=2 align=middle width=30 height=30 alt=7>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button8.gif border=2 align=middle width=30 height=30 alt=8>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button9.gif border=2 align=middle width=30 height=30 alt=9>" \ "<img src=http://claspc2.cebaf.gov/icons/htdig/button10.gif border=2 align=middle width=30 height=30 alt=10>" # local variables: # mode: text # eval: (if (eq window-system 'x) (progn (setq font-lock-keywords (list '("^#.*" . font-lock-keyword-face) '("^[a-zA-Z][^ :]+" . font-lock-function-name-face) '("[+$]*:" . font-lock-comment-face) )) (font-lock-mode))) # end: Nry^bf)+-jgb] +'x-" ^Šݺ{.n+PD :z



This archive was generated by hypermail 2.0b3 on Tue Oct 05 1999 - 16:15:39 PDT