Re: htdig: Configuration with HP


Gordon Hopper (gordon@byu.edu)
Fri, 11 Dec 1998 13:39:56 -0700


Here's what happens without the --host switch on my machine:

% ./configure
(snip)
Now you must run 'make' followed by 'make install'

% make
make[1]: Entering directory
`/tmp_mnt/auto/caedm/local/apache/htdig-3.1.0b2/db-2.4.14/dist'
gcc -c -O -I. -I./../include ../btree/bt_close.c
In file included from /usr/include/sys/types.h:15,
                 from ../btree/bt_close.c:54:
/usr/include/sys/stdsyms.h:244: #error "Large Files (ILP32) not
supported in strict ANSI mode."
make[1]: *** [bt_close.o] Error 1
make[1]: Leaving directory
`/tmp_mnt/auto/caedm/local/apache/htdig-3.1.0b2/db-2.4.14/dist'
make: *** [all] Error 1

I have attached config.log as a mime attachment.

By the way, another interesting thing. The file that caused the error
was in the db-2.4.14 directory (it looks like the database package was
written by a different author.) When I directly run the
../dist/configure from within the db-2.4.14/build.unix directory,
followed by a make in the same spot, there is no error. After running
this configure; make, I tried to run the htdig-3.1.0b2/make, but it
still gives the same error

I have also attached the db-2.4.14 config.log, so you can see where are
the differences.

Gordon

Vadim Chekan wrote:
>
> -----Original Message-----
> From: Gordon Hopper <gordon@byu.edu>
> To: Defranould <Maxime.Defranould@loria.fr>
> Cc: htdig@sdsu.edu <htdig@sdsu.edu>
> Date: 10 1998 . 19:42
> Subject: Re: htdig: Configuration with HP
>
> >I had a similar problem with HP-UX 10.20 (hppa1.1, gcc/g++ version
> >2.7.2.3). It looks like there is something wrong with the configure
> >script (my error actually occured during the make). It compiled ok when
> >I did:
> >
> >./configure --host=POSIX.2
> >
> >I'm not enough of a guru to tell you _why_ this worked, but I think that
> >the configure script incorrectly auto-detects something about HPUX.
> >
>
> Can you post your config.log?
>
> Vadim Chekan.

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

configure:553: checking for a BSD compatible install
configure:606: checking whether build environment is sane
configure:663: checking whether make sets ${MAKE}
configure:709: checking for working aclocal
configure:722: checking for working autoconf
configure:735: checking for working automake
configure:748: checking for working autoheader
configure:761: checking for working makeinfo
configure:786: checking for gcc
configure:863: checking whether the C compiler (gcc ) works
configure:877: gcc -o conftest conftest.c 1>&5
configure:897: checking whether the C compiler (gcc ) is a cross-compiler
configure:902: checking whether we are using GNU C
configure:911: gcc -E conftest.c
configure:926: checking whether gcc accepts -g
configure:958: checking for c++
configure:989: checking whether the C++ compiler (c++ ) works
configure:1003: c++ -o conftest conftest.C 1>&5
configure:1029: checking whether the C++ compiler (c++ ) is a cross-compiler
configure:1034: checking whether we are using GNU C++
configure:1043: c++ -E conftest.C
configure:1058: checking whether c++ accepts -g
configure:1088: checking for ranlib
configure:1117: checking for ar
configure:1149: checking for sh
configure:1181: checking for sed
configure:1213: checking for sort
configure:1245: checking for find
configure:1277: checking for gunzip
configure:1311: checking for tar
configure:1343: checking for acroread
configure:1375: checking for sendmail
configure:1406: checking how to run the C preprocessor
configure:1427: gcc -E conftest.c >/dev/null 2>conftest.out
configure:1467: checking for AIX
configure:1492: checking for socket in -lsocket
configure:1511: gcc -o conftest -g -O2 conftest.c -lsocket 1>&5
collect2: ld returned 1 exit status
/bin/ld: Can't find library for -lsocket
configure: failed program was:
#line 1500 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply. */
char socket();

int main() {
socket()
; return 0; }
configure:1532: checking for t_accept in -lnsl
configure:1551: gcc -o conftest -g -O2 conftest.c -lnsl 1>&5
collect2: ld returned 1 exit status
/bin/ld: Can't find library for -lnsl
configure: failed program was:
#line 1540 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply. */
char t_accept();

int main() {
t_accept()
; return 0; }
configure:1574: checking for ANSI C header files
configure:1587: gcc -E conftest.c >/dev/null 2>conftest.out
configure:1654: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1678: checking whether time.h and sys/time.h may both be included
configure:1692: gcc -c -g -O2 conftest.c 1>&5
configure:1721: checking how to run the C++ preprocessor
configure:1739: c++ -E conftest.C >/dev/null 2>conftest.out
configure:1761: checking for fcntl.h
configure:1771: c++ -E conftest.C >/dev/null 2>conftest.out
configure:1761: checking for limits.h
configure:1771: c++ -E conftest.C >/dev/null 2>conftest.out
configure:1761: checking for malloc.h
configure:1771: c++ -E conftest.C >/dev/null 2>conftest.out
configure:1761: checking for sys/file.h
configure:1771: c++ -E conftest.C >/dev/null 2>conftest.out
configure:1761: checking for sys/ioctl.h
configure:1771: c++ -E conftest.C >/dev/null 2>conftest.out
configure:1761: checking for sys/time.h
configure:1771: c++ -E conftest.C >/dev/null 2>conftest.out
configure:1761: checking for unistd.h
configure:1771: c++ -E conftest.C >/dev/null 2>conftest.out
configure:1799: checking for fstream.h
configure:1809: c++ -E conftest.C >/dev/null 2>conftest.out
configure:1843: checking for working const
configure:1897: gcc -c -g -O2 conftest.c 1>&5
configure:1918: checking whether struct tm is in sys/time.h or time.h
configure:1931: gcc -c -g -O2 conftest.c 1>&5
configure:1955: checking for strdup
configure:1983: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1955: checking for strerror
configure:1983: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1955: checking for strstr
configure:1983: gcc -o conftest -g -O2 conftest.c 1>&5
configure:2010: checking for localtime_r
configure:2038: gcc -o conftest -g -O2 conftest.c 1>&5
configure:2063: checking for timegm
configure:2091: gcc -o conftest -g -O2 conftest.c 1>&5
collect2: ld returned 1 exit status
/bin/ld: Unsatisfied symbols:
   timegm (code)
configure: failed program was:
#line 2068 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char timegm(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply. */
char timegm();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS. Some functions are actually named
    something starting with __ and the normal name is an alias. */
#if defined (__stub_timegm) || defined (__stub___timegm)
choke me
#else
timegm();
#endif

; return 0; }
configure:2112: checking whether we need gethostname() prototype?
configure:2132: gcc -c -g -O2 conftest.c 1>&5
configure:2126: parse error before string constant
configure: failed program was:
#line 2114 "configure"
#include "confdefs.h"
#include <unistd.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <sys/ioctl.h>
#include <sys/uio.h>
#include <sys/file.h>
#include <fcntl.h>
#include <netdb.h>
#include <stdlib.h>
extern "C" int gethostname(char *, int);
int main() {
gethostname("sdsu.edu", (int) 8);
; return 0; }
configure:2162: checking for tsort

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

configure:568: checking for a BSD compatible install
configure:624: checking host system type
configure:688: checking if --enable-debug option specified
configure:712: checking for gcc
configure:789: checking whether the C compiler (gcc -O ) works
configure:803: gcc -o conftest -O conftest.c 1>&5
configure:823: checking whether the C compiler (gcc -O ) is a cross-compiler
configure:828: checking whether we are using GNU C
configure:852: checking whether gcc accepts -g
configure:881: checking if --enable-diagnostic option specified
configure:899: checking if --enable-cxx option specified
configure:1053: checking if --enable-compat185 option specified
configure:1069: checking if --enable-dump185 option specified
configure:1086: checking for ar
configure:1121: checking for chmod
configure:1156: checking for cp
configure:1191: checking for mkdir
configure:1226: checking for ranlib
configure:1258: checking for rm
configure:1293: checking for sh
configure:1328: checking for strip
configure:1362: checking how to run the C preprocessor
configure:1423: checking for ANSI C header files
configure:1527: checking for ssize_t
configure:1560: checking whether byte ordering is bigendian
configure:1578: gcc -c -O conftest.c 1>&5
configure: In function `main':
configure:1573: `bogus' undeclared (first use this function)
configure:1573: (Each undeclared identifier is reported only once
configure:1573: for each function it appears in.)
configure:1573: parse error before `endian'
configure: failed program was:
#line 1567 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() {

#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
 bogus endian macros
#endif
; return 0; }
configure:1626: gcc -o conftest -O conftest.c 1>&5
configure: failed program was:
#line 1613 "configure"
#include "confdefs.h"
main () {
  /* Are we little or big endian? From Harbison&Steele. */
  union
  {
    long l;
    char c[sizeof (long)];
  } u;
  u.l = 1;
  exit (u.c[sizeof (long) - 1] == 1);
}
configure:1650: checking for working const
configure:1725: checking for st_blksize in struct stat
configure:1738: gcc -c -O conftest.c 1>&5
configure:1759: checking whether stat file-mode macros are broken
configure:1815: checking for mode_t
configure:1848: checking for off_t
configure:1881: checking for pid_t
configure:1914: checking for size_t
configure:1952: checking for dirent.h that defines DIR
configure:1965: gcc -c -O conftest.c 1>&5
configure:1990: checking for opendir in -ldir
configure:2009: gcc -o conftest -O conftest.c -ldir 1>&5
collect2: ld returned 1 exit status
/bin/ld: Can't find library for -ldir
configure: failed program was:
#line 1998 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply. */
char opendir();

int main() {
opendir()
; return 0; }
configure:2076: checking for sys/select.h
configure:2086: gcc -E conftest.c >/dev/null 2>conftest.out
configure:2082: sys/select.h: No such file or directory
configure: failed program was:
#line 2081 "configure"
#include "confdefs.h"
#include <sys/select.h>
configure:2116: checking for sys/time.h
configure:2156: checking for getcwd
configure:2184: gcc -o conftest -O conftest.c 1>&5
configure:2156: checking for getopt
configure:2184: gcc -o conftest -O conftest.c 1>&5
configure:2156: checking for memcmp
configure:2184: gcc -o conftest -O conftest.c 1>&5
configure:2168: warning: conflicting types for built-in function `memcmp'
configure:2156: checking for memcpy
configure:2184: gcc -o conftest -O conftest.c 1>&5
configure:2168: warning: conflicting types for built-in function `memcpy'
configure:2156: checking for memmove
configure:2184: gcc -o conftest -O conftest.c 1>&5
configure:2213: checking for raise
configure:2241: gcc -o conftest -O conftest.c 1>&5
configure:2213: checking for snprintf
configure:2241: gcc -o conftest -O conftest.c 1>&5
configure:2213: checking for strerror
configure:2213: checking for strsep
configure:2241: gcc -o conftest -O conftest.c 1>&5
collect2: ld returned 1 exit status
/bin/ld: Unsatisfied symbols:
   strsep (code)
configure: failed program was:
#line 2218 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char strsep(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply. */
char strsep();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS. Some functions are actually named
    something starting with __ and the normal name is an alias. */
#if defined (__stub_strsep) || defined (__stub___strsep)
choke me
#else
strsep();
#endif

; return 0; }
configure:2213: checking for vsnprintf
configure:2241: gcc -o conftest -O conftest.c 1>&5
configure:2385: checking for munmap
configure:2413: gcc -o conftest -O conftest.c 1>&5
configure:2430: checking for mmap
configure:2458: gcc -o conftest -O conftest.c 1>&5
configure:2490: checking for getuid
configure:2518: gcc -o conftest -O conftest.c 1>&5
configure:2490: checking for select
configure:2518: gcc -o conftest -O conftest.c 1>&5
configure:2490: checking for sysconf
configure:2518: gcc -o conftest -O conftest.c 1>&5
configure:2551: checking for sigfillset
configure:2563: gcc -o conftest -O conftest.c 1>&5
configure:2584: checking for int type sprintf return value
configure:2596: gcc -o conftest -O conftest.c 1>&5
configure:2619: checking if --disable-bigfile option specified
configure:2641: checking for spinlocks
configure:2665: gcc -o conftest -O conftest.c 1>&5
configure:3092: checking for u_char
configure:3104: gcc -c -O conftest.c 1>&5
configure:3123: checking for u_short
configure:3135: gcc -c -O conftest.c 1>&5
configure:3154: checking for u_int
configure:3166: gcc -c -O conftest.c 1>&5
configure:3185: checking for u_long
configure:3197: gcc -c -O conftest.c 1>&5
configure:3216: checking for u_int8_t
configure:3228: gcc -c -O conftest.c 1>&5
configure: In function `main':
configure:3224: `u_int8_t' undeclared (first use this function)
configure:3224: (Each undeclared identifier is reported only once
configure:3224: for each function it appears in.)
configure:3224: parse error before `foo'
configure: failed program was:
#line 3221 "configure"
#include "confdefs.h"
#include <sys/types.h>
int main() {
u_int8_t foo;
; return 0; }
configure:3243: gcc -o conftest -O conftest.c 1>&5
configure:3269: checking for u_int16_t
configure:3281: gcc -c -O conftest.c 1>&5
configure: In function `main':
configure:3277: `u_int16_t' undeclared (first use this function)
configure:3277: (Each undeclared identifier is reported only once
configure:3277: for each function it appears in.)
configure:3277: parse error before `foo'
configure: failed program was:
#line 3274 "configure"
#include "confdefs.h"
#include <sys/types.h>
int main() {
u_int16_t foo;
; return 0; }
configure:3296: gcc -o conftest -O conftest.c 1>&5
configure:3341: checking for int16_t
configure:3353: gcc -c -O conftest.c 1>&5
configure:3413: checking for u_int32_t
configure:3425: gcc -c -O conftest.c 1>&5
configure: In function `main':
configure:3421: `u_int32_t' undeclared (first use this function)
configure:3421: (Each undeclared identifier is reported only once
configure:3421: for each function it appears in.)
configure:3421: parse error before `foo'
configure: failed program was:
#line 3418 "configure"
#include "confdefs.h"
#include <sys/types.h>
int main() {
u_int32_t foo;
; return 0; }
configure:3440: gcc -o conftest -O conftest.c 1>&5
configure:3485: checking for int32_t
configure:3497: gcc -c -O conftest.c 1>&5
configure:3556: checking if --enable-test option specified

----------------------------------------------------------------------
To unsubscribe from the htdig mailing list, send a message to
htdig-request@sdsu.edu containing the single word "unsubscribe" in
the body of the message.



This archive was generated by hypermail 2.0b3 on Sat Jan 02 1999 - 16:29:50 PST