Subject: Re: [htdig3-dev] [SOLVED] --enable-bigfile problem
From: J. op den Brouw (MSQL_User@st.hhs.nl)
Date: Fri Sep 01 2000 - 02:28:24 PDT
For the db subdirectory, it doesn't work. I think you
forgot to regenerate db/configure from db/configure.in
(db/configure isn't included in the patch)
But for the main configure, it is hopefull...
BTW patching worked like a charm
checking if --enable-bigfile option specified...
option | main db
----------------------+-----------------------------
--enable-bigfile | yes no
--enable-bigfile=yes | yes no
--enable-bigfile=no | no no
--disable-bifgile | no no
<none> | yes yes
On Thu, 31 Aug 2000, Geoff Hutchison wrote:
> At 1:09 PM +0200 8/30/00, J. op den Brouw wrote:
> >I have reasons to believe I've solved the --enable-bigfile problem.
>
> Could you look at these patches--I believe they do exactly what you
> described. I went with $enable_bigfile since that was more consistent
> with the other --enable flags I saw, but the end result should be the
> same.
>
> Let me know if I missed any files.
> -Geoff
--jesse
--------------------------------------------------------------------
J. op den Brouw Johanna Westerdijkplein 75
Haagse Hogeschool 2521 EN DEN HAAG
Faculty of Engeneering Netherlands
Electrical Engeneering +31 70 4458936
-------------------- J.E.J.opdenBrouw@st.hhs.nl --------------------
Linux - because reboots are for hardware changes
------------------------------------
To unsubscribe from the htdig3-dev mailing list, send a message to
htdig3-dev-unsubscribe@htdig.org
You will receive a message to confirm this.
This archive was generated by hypermail 2b28 : Fri Sep 01 2000 - 02:29:44 PDT